Page Comparison

As of Weave 2.5, there is a built-in map engine that is able to generate map images based on spatial data that has been registered using a Spatial Engine.

The configuration for the Weave map engine consists of two parts, the first part defines what data will be made available to be drawn by the map engine, and the second part determines how that data will be drawn.

Namespace

urn:com.cohga.server.map.weave#1.0

Tags

mapengine

Properties

layer

Properties

style

Properties

Notes

See the section below on inline styles for information on how the styles are defined.

Example

Example Weave map engine

<?xml version="1.0" encoding="UTF-8"?>

<config xmlns="urn:com.cohga.server.config#1.0" xmlns:weave="urn:com.cohga.server.map.weave#1.0">

	<weave:mapengine id="vector">
		<spatialengine>gis</spatialengine>
		<format>image/png32</format>
		<layers>
			<layer id="contours01" label="Contours 1m" layer="GIS.CONTOURS_01M" style="contour"/>
			<layer id="contours02" label="Contours 2m" layer="GIS.CONTOURS_02M" style="contour"/>
			<layer id="contours05" label="Contours 5m" layer="GIS.CONTOURS_05M" style="contour"/>
			<layer id="contours10" label="Contours 10m" layer="GIS.CONTOURS_10M" style="contour"/>
		</layers>
		<styles>
			<style id="contour">
				<type>line</type>
				<stroke-color>#853111</stroke-color>
				<stroke-width>2</stroke-width>
			</style>
		</styles>
	</weave:mapengine>

</config>

The above example creates a map engine with four layers that all use the same simple rendering.

Note that to use this map engine in a client you still need to create a Table Of Contents and add it as a map engine to the Map View. This map engine is treated exactly the same as the other map engines (e.g. ArcIMS, WMS, ArcGIS Server, etc)

You can specify one or more filters for each layer that can be used to refine what data is retrieved from the underlying table, e.g.

Filtering data using CQL

<layer id="active_incidents" label="Active Incidents" layer="GIS.INCIDENTS" style="incidents">
	<filter>STATUS = 'ACTIVE'</filter>
</layer>
<layer id="inactive_incidents" label="Inactive Incidents" layer="GIS.INCIDENTS" style="incidents">
	<filter><![CDATA[STATUS <> 'ACTIVE']]></filter>
</layer>

Here we've split a single spatial table into two layers, note the use of the <![CDATA[...]]> to enclose the second filter, because it contains special XML characters (< and >).

You can use multiple filter tags for each layer, and they will be combined using an AND, that is the data must satisfy all filters to be displayed.

The filters are specified using the CQL query language, which is similar to SQL.

The styles section can define multiple named styles, which are then referenced using the style attribute of the individual layer in the layers section.

The example above uses a simple inline style definition that uses CSS like attributes to define how the vector data should be drawn. It's also possible to use an external SLD (Styled Layer Descriptor) file to describe how the layer should be displayed if you require more advanced styling. In this case, you can just reference the SLD file using the layer style attribute, e.g.

Using an external SLD file to style a layer

			<layer id="contours01" label="Contours 1m" layer="GIS.CONTOURS_01M" style="sld\contours.sld"/>

In this example there should be a file located at weave\platform\workspace\sld\contours.sld that contains the XML definition for the style.

Example SLD file

<?xml version="1.0" encoding="ISO-8859-1"?>
<StyledLayerDescriptor version="1.0.0" xmlns="http://www.opengis.net/sld" xmlns:ogc="http://www.opengis.net/ogc"
  xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  xsi:schemaLocation="http://www.opengis.net/sld http://schemas.opengis.net/sld/1.0.0/StyledLayerDescriptor.xsd">
  <NamedLayer>
    <Name>Contour</Name>
    <UserStyle>
      <Title>Contour</Title>
      <FeatureTypeStyle>
        <Rule>
          <LineSymbolizer>
            <Stroke>
              <CssParameter name="stroke">#853111</CssParameter>
              <CssParameter name="stroke-width">2</CssParameter>
            </Stroke>
          </LineSymbolizer>
        </Rule>
      </FeatureTypeStyle>
    </UserStyle>
  </NamedLayer>
</StyledLayerDescriptor>

This SLD file does not do much more than the inline style shown in the first example, but this page isn't a tutorial on SLD.

Alternatively, when referring to an external SLD file it can also be specified in the style itself, rather than the layer, so the layer can reference one of the inline styles, and the style then points to the external SLD file, e.g.

		<styles>
			<style id="contour">sld\contours.sld</style>
		</styles>

This way if you use the same SLD file for multiple layers you can just reference a single inline style and have that style refer to the SLD file.

Inline Styles

 When specifying a style within the Weave map engine config directly you need to specify an id for the style, so that it can be referenced by the layer, and also what type of features the style will be applied to, point, line (or linestring) or polygon, and you do this by setting the type attribute for the style.

Additionally, you can specify a maximum and minimum scale range for the style using minScale (or minscale) and maxScale (or maxscale).

Finally, you can also specify a label (or title) and a description (or abstract) which can be used when generating the legend.

After that, it's just a case of setting the appropriate attributes that define how you want the data rendered.

The following are the different values that can be used with an inline style definition, note that both "colour" and "color" can be used, and the hyphen is also optional, so "stroke-colour" and "strokecolor" can both be used.

When specifying colours you can either use hex notation with RRGGBB and prefix the value with a #, for example, #ff0000 for red, or you can use a pre-defined colour from the list black, blue, cyan, darkgray, darkgrey, gray, grey, green, lightgray, lightgrey, magenta, orange, pink, red, white, yellow.

The mark type can be one of square, circle, triangle, star, cross, arrow or x.

When specifying a style for lines you can specify the stroke attributes, for a polygon both stroke and fill attributes, and for points stroke, fill and mark are required.

Stroke

Fill

Mark

Joining Tables

From 2.6.4 it's possible to join to another table if the underlying spatial engine is using a database, i.e. this won't work for shapefiles for example. 

This would for example provide the ability to filter the rows displayed on the map based on the value in a column in a table different from the one containing the geometry. To join the additional table you need to add a <join/> tag with the information about the other table (which must be in the same database) and how it is joined to the source table. Additionally you can set the type of join, inner or outer, and add a filter for the extra table.

<layer id="my_active_incidents" label="My Active Incidents" layer="GIS.INCIDENTS" style="incidents">
	<join>
		<type>inner</type> <!-- this is the default, and will result in only the rows that are in both tables being displayed -->
		<table>GIS.INCIDENT_DETAILS</table> <!-- The name of the table to join to GIS.INCIDENTS -->
		<where>ID = ID</where> <!-- The columns in the two tables to join, must always be an equals -->
		<filter>STATUS = 'ACTIVE'</filter> <!-- An additional filter to further reduce the rows that are displayed -->
		<filter>USERID = '${user.id}'/> <!-- Another filter, this time selecting rows that belong to the current user -->
	</join>
</layer>

Join