Versions Compared

Version Old Version 21 New Version 22
Changes made by

Lucy Minato (Deactivated)

Shaun Forbes

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

ParameterDescription
-f, --file <filename>

Filename of a text file that has a list of base URL's for the WMS services. Each line in the file should contain a single WMS URL.

-u, --url <url>

The base URL for the WMS service, this can be added more than once, but the -f command can also be used for multiple URL's.

-e, --envelope <minx,miny,maxx,maxy>

The envelope to use to draw the map. This is alternative to -l, and can not be set if -l is set.

-l, --location <x,y,scale>

The centre location to use to draw the map. This is alternative to -e, and can not be set if -e is set.

-c, --crs <crs>

The CRS to use for the map requests. If not set a suitable CRS wil be determined by the following logic:

  • If all layers support WGS84 that will be used
  • If all layers have a common CRS one of those will be used
  • If a layer supports WGS84 that will be used
  • If a layer supports any other CRS that will be used
-x, --maxscale <scale>

The maximum scale to use to generate the map.

-s, --size <width,height>

The width and height, in pixels, of the generated map image. The default is 400,400

-D, --dpi <DPI>

DPI to use when creating the map images. The default is 90.71.

-t, --timeout <timeout> 

The network timeout in seconds. The default is 120

-n, --nomap

Just retrieve the capabilities document, and do not generate a map request.

-o, --output <filename>

Output results to a CSV file.

-d, --dump <filename>

Dump the generated images to a file, the default is image.zip.

-b, --background <threads>

Create all the connections in the background at the same time, rather than processing the URLs one by one. Including the <threads> value will specify how may tasks to do at once, if a value for <threads> is not set then all tasks will be performed at once, if this option isn't included at all then each task will be performed one after the other.

-U, --username <username>

Username to connect with, and must be supplied if the password is set.

-P, --password <password>

Password to connect with, and must be supplied if username is set.

-q, --quiet

Do not output results to the console.

-h, --help

Show this help and quit.

-V, --version

Print the version of the WMS Tester and exit.

--ignorescalesDon't make use of the scale ranges reported by the WMS service to adjust the extents of the generated map images.
--format <format>Set the format of the image to generate, the default is jpeg jpg. The image formats supported are dependant upon what the WMS server is setup to support.

If neither -l or -e is set then the area to draw will be calculated based on the extent of the layer, but it will be adjusted if a maximum scale range has been applied to the layer, or -x is set, unless --ignorescales is specified.

...

  • Return the layers in the WMS, the scale at which the layer is drawn and the time taken to draw layer (in milliseconds)

    Code Block
    themeRDark
    c:\weave\jre\bin\java -jar c:\weave\wmstest.jar -u http://qgis/cgi-bin/qgis_mapserv.fcgi?map=/mnt/storage/weave/qgis/project.qgs
connected to http://qgis/cgi-bin/qgis_mapserv.fcgi?map=/mnt/storage/weave/qgis/project.qgs in 2,521ms
drew "topp:secondary_schools" as image/jpegjpg at 1:70,894 in 411ms
drew "topp:school_primary" as image/jpegjpg at 1:112,940 in 415ms
drew "topp:buildings" as image/jpegjpg at 1:119,980 in 417ms
drew "topp:busstops" as image/jpegjpg at 1:127,470 in 704ms
drew "topp:contour10" as image/jpegjpg at 1:154,230 in 930ms
drew "topp:contour05" as image/jpegjpg at 1:152,730 in 1,366ms
drew "topp:contour02" as image/jpegjpg at 1:152,720 in 2,765ms
drew "topp:contour01" as image/jpegjpg at 1:152,900 in 5,156ms
drew "topp:drainage" as image/jpegjpg at 1:127,120 in 764ms
drew "topp:sewer_pipe" as image/jpegjpg at 1:136,970 in 711ms
drew "topp:water_pipe" as image/jpegjpg at 1:187,430 in 1,710ms
drew "topp:busroutes" as image/jpegjpg at 1:130,490 in 431ms
drew "topp:road" as image/jpegjpg at 1:17,678 in 359ms
drew "topp:mainroad" as image/jpegjpg at 1:140,600 in 452ms
drew "topp:hydro" as image/jpegjpg at 1:148,400 in 444ms
drew "topp:mainhydro" as image/jpegjpg at 1:146,910 in 459ms
drew "topp:easement" as image/jpegjpg at 1:7,071 in 361ms
drew "topp:property_dissolved" as image/jpegjpg at 1:7,071 in 367ms
drew "topp:property" as image/jpegjpg at 1:7,071 in 363ms
drew "topp:ward" as image/jpegjpg at 1:147,260 in 431ms
drew "topp:suburb" as image/jpegjpg at 1:149,110 in 461ms
drew "topp:mccbound" as image/jpegjpg at 1:147,300 in 426ms

  • Testing a WMS with background processing to simulate multiple users hitting the WMS server at the same time

    Code Block
    themeRDark
    c:\weave\jre\bin\java -jar c:\weave\wmstest.jar -u http://qgis/cgi-bin/qgis_mapserv.fcgi?map=/mnt/storage/weave/qgis/project.qgs -b
connected to http://qgis/cgi-bin/qgis_mapserv.fcgi?map=/mnt/storage/weave/qgis/project.qgs in 2,825ms
drew "topp:secondary_schools" as image/jpeg at 1:72,316 in 13,051ms
drew "topp:ward" as image/jpegjpg at 1:149,830 in 13,432ms
drew "topp:busroutes" as image/jpegjpg at 1:132,220 in 13,689ms
drew "topp:easement" as image/jpegjpg at 1:10,000 in 13,856ms
drew "topp:property" as image/jpegjpg at 1:10,000 in 14,133ms
drew "topp:hydro" as image/jpegjpg at 1:151,100 in 14,472ms
drew "topp:school_primary" as image/jpegjpg at 1:114,310 in 14,643ms
drew "topp:mainhydro" as image/jpegjpg at 1:149,790 in 14,664ms
drew "topp:buildings" as image/jpegjpg at 1:121,840 in 14,698ms
drew "topp:property_dissolved" as image/jpegjpg at 1:10,000 in 14,809ms
drew "topp:mccbound" as image/jpegjpg at 1:149,860 in 14,860ms
drew "topp:mainroad" as image/jpegjpg at 1:142,520 in 14,949ms
drew "topp:road" as image/jpegjpg at 1:25,000 in 14,962ms
drew "topp:suburb" as image/jpegjpg at 1:151,750 in 15,435ms
drew "topp:busstops" as image/jpegjpg at 1:128,880 in 17,027ms
drew "topp:sewer_pipe" as image/jpegjpg at 1:139,040 in 17,370ms
drew "topp:contour10" as image/jpegjpg at 1:156,830 in 17,761ms
drew "topp:drainage" as image/jpegjpg at 1:129,140 in 17,818ms
drew "topp:contour05" as image/jpegjpg at 1:155,440 in 18,993ms
drew "topp:water_pipe" as image/jpegjpg at 1:190,730 in 20,413ms
drew "topp:contour02" as image/jpegjpg at 1:155,440 in 22,174ms
drew "topp:contour01" as image/jpegjpg at 1:155,440 in 24,777ms
    Code Block
    themeRDark
    c:\weave\jre\bin\java -jar c:\weave\wmstest.jar -u http://qgis/cgi-bin/qgis_mapserv.fcgi?map=/mnt/storage/weave/qgis/project.qgs -b 2
connected to http://qgis/cgi-bin/qgis_mapserv.fcgi?map=/mnt/storage/weave/qgis/project.qgs in 2,885ms
drew "topp:school_primary" as image/jpeg at 1:114,310 in 755ms
drew "topp:secondary_schools" as image/jpeg at 1:72,316 in 757ms
drew "topp:buildings" as image/jpegjpg at 1:121,840 in 781ms
drew "topp:busstops" as image/jpegjpg at 1:128,880 in 1,393ms
drew "topp:contour10" as image/jpegjpg at 1:156,830 in 1,629ms
drew "topp:contour05" as image/jpegjpg at 1:155,440 in 2,310ms
drew "topp:contour02" as image/jpegjpg at 1:155,440 in 5,141ms
drew "topp:drainage" as image/jpegjpg at 1:129,140 in 1,440ms
drew "topp:sewer_pipe" as image/jpegjpg at 1:139,040 in 1,340ms
drew "topp:contour01" as image/jpegjpg at 1:155,440 in 8,851ms
drew "topp:busroutes" as image/jpegjpg at 1:132,220 in 850ms
drew "topp:water_pipe" as image/jpegjpg at 1:190,730 in 3,369ms
drew "topp:road" as image/jpegjpg at 1:25,000 in 769ms
drew "topp:mainroad" as image/jpegjpg at 1:142,520 in 696ms
drew "topp:hydro" as image/jpegjpg at 1:151,100 in 730ms
drew "topp:mainhydro" as image/jpegjpg at 1:149,790 in 787ms
drew "topp:easement" as image/jpegjpg at 1:10,000 in 719ms
drew "topp:property_dissolved" as image/jpegjpg at 1:10,000 in 764ms
drew "topp:property" as image/jpegjpg at 1:10,000 in 749ms
drew "topp:ward" as image/jpegjpg at 1:149,830 in 675ms
drew "topp:suburb" as image/jpegjpg at 1:151,750 in 736ms
drew "topp:mccbound" as image/jpegjpg at 1:149,860 in 629ms

  • Getting map images from a WMS: Creates a file (images.zip) in the current folder containing map images generated based on parameters submitted

    Code Block
    themeRDark
    c:\weave\jre\bin\java -jar c:\weave\wmstest.jar -u http://qgis/cgi-bin/qgis_mapserv.fcgi?map=/mnt/storage/weave/qgis/project.qgs -d
connected to http://qgis/cgi-bin/qgis_mapserv.fcgi?map=/mnt/storage/weave/qgis/project.qgs in 2,914ms
drew "topp:secondary_schools" as image/jpeg at 1:72,316 in 406ms
drew "topp:school_primary" as image/jpegjpg at 1:114,310 in 425ms
drew "topp:buildings" as image/jpegjpg at 1:121,840 in 426ms
drew "topp:busstops" as image/jpegjpg at 1:128,880 in 730ms
drew "topp:contour10" as image/jpegjpg at 1:156,830 in 981ms
drew "topp:contour05" as image/jpegjpg at 1:155,440 in 1,471ms
drew "topp:contour02" as image/jpegjpg at 1:155,440 in 3,085ms
drew "topp:contour01" as image/jpegjpg at 1:155,440 in 5,450ms
drew "topp:drainage" as image/jpegjpg at 1:129,140 in 823ms
drew "topp:sewer_pipe" as image/jpegjpg at 1:139,040 in 789ms
drew "topp:water_pipe" as image/jpegjpg at 1:190,730 in 1,876ms
drew "topp:busroutes" as image/jpegjpg at 1:132,220 in 462ms
drew "topp:road" as image/jpegjpg at 1:25,000 in 443ms
drew "topp:mainroad" as image/jpegjpg at 1:142,520 in 444ms
drew "topp:hydro" as image/jpegjpg at 1:151,100 in 450ms
drew "topp:mainhydro" as image/jpegjpg at 1:149,790 in 460ms
drew "topp:easement" as image/jpegjpg at 1:10,000 in 437ms
drew "topp:property_dissolved" as image/jpegjpg at 1:10,000 in 460ms
drew "topp:property" as image/jpegjpg at 1:10,000 in 466ms
drew "topp:ward" as image/jpegjpg at 1:149,830 in 439ms
drew "topp:suburb" as image/jpegjpg at 1:151,750 in 476ms
drew "topp:mccbound" as image/jpegjpg at 1:149,860 in 433ms