The Weave/ProClaim integration provides a two-way link between Weave and ProClaim. That is ProClaim can call out to Weave to display information and Weave can call out to ProClaim to display information.

For additional information about using the newer Weave Hub integration please see this page Weave Hub - Third-party Application Integration.

Client Workstation

The link between Weave and ProClaim requires the installation of components on each client computer that will be communicating between Weave and ProClaim.

The following sections outline the installation and configuration of these components.

Installation

The ProClaim components are installed on the server as part of the Interop installer. When the Interop installer is run and ProClaim chosen as one of the components to install this will install the server side components and also copy the client components to the server in the weave\interop\proclaim directory, these components, along with the WeaveLink components must be registered on any client PC that will be linking between Weave and ProClaim.

Registration of the ProClaim components should be performed using the regsvr32.exe application provided with Windows, e.g.

...

regsvr32 WeaveProclaimLink.dll
regsvr32 WeaveMapLink.dll

Un-installation

The installation can be undone by using regsvr32 with the "/u" parameter, e.g.

...

regsvr32 /u WeaveProclaimLink.dll
regsvr32 /u WeaveMapLink.dll

latest version of the ProClaim integration requires Weave Hub to be installed on the client PC, see this page for information on installing Weave Hub.

Once Weave Hub is installed on each client PC you need to install the ProClaim add-in for Weave Hub to add support for ProClaim to Weave Hub.

The Proclaim Weave Hub add-in is installed via a .msi file and only provides the option to change the installation directory, which defaults to C:\Program Files\Cohga\WeaveHub\Proclaim\. The installer also creates some registry entries, to register the add-in with Weave Hub.

In addition to the Weave Hub add-in, the installer also installs and registers a COM object that can be used by Proclaim to communicate with Weave. The name of the COM object is WeaveHubProclaim.MapAutomation and must be registered within Proclaim as the component to call when communicating with a GIS, which is outlined at the bottom of this page. Like the Pathway and Trim integrations, the COM object just sends messages to Weave Hub which will then forward them on to the browser.

Server

Configuration

Server

For Weave to communicate with ProClaim there needs to be a number of parameters need to be specified, which can be set separately for different instances of ProClaim.

Firstly the proclaim namespace must be added to the config.xml file header (or a separate proclaim.xml file can be created and included into config.xml)

<?xml version="1.0" encoding="UTF-8"?>

<config xmlns="urn:com.cohga.server.config#1.0" xmlns:proclaim="urn:com.cohga.proclaim#1.0">
...
</config>

then the proclaim configuration must be setup to provide the connection information required for ProClaim and to tell Weave what entities to allow the transfer for.

<?xml version="1.0" encoding="UTF-8"?>

<config xmlns="urn:com.cohga.server.config#1.0" xmlns:proclaim="urn:com.cohga.proclaim#1.0">

  <proclaim:config id="production">
    <datasourcename>DSN</datasourcename>
    <server>Server</server>
    <database>Database</database>
    <username>Username</username>
    <password>ENCSEMPKCCSFQTJBFMPABFJEBZJAKFCXGME</password>
    <from>Weave</from>
    <to>ProClaim</to>
    <entity id="property"/>
    <entity id="street"/>
  </proclaim:config>

</config>

...

The 'entity' tags setup sources for data to send to ProClaim and targets for data sent from ProClaim.
When setting up a linkage in ProClaim to go from Weave to ProClaim the source entity should be set to the 'id' attribute of the entity tag.
When setting up a linkage in ProClaim to go from ProClaim to Weave the destination entity should be set to the 'id' attribute of the entity tag.

Client

Once the server have has been configured the ProClaim action can be added to a toolbar in the client configuration. Note the change to "proclaim2" below, it was previously just "proclaim".

<item action="com.cohga.proclaimproclaim2.Send" version="production"/>

...

If you need to filter the values before sending them to ProClaim, because ProClaim uses different identifiers for the entity than Weave does, then you can specify a filter when seting up the entities in the config details and add the definition for the filter. Note the addition of the new xmlns:filter="urn:com.cohga.selection.filter#1.0" namespace.

<?xml version="1.0" encoding="UTF-8"?>

<config xmlns="urn:com.cohga.server.config#1.0" xmlns:proclaim="urn:com.cohga.proclaim#1.0" xmlns:filter="urn:com.cohga.selection.filter#1.0">

  <proclaim:config id="production">
    <datasourcename>proclaim</datasourcename>
    <server>SQLSERVER2008\SQLEXPRESS</server>
    <database>ProProd</database>
    <username>proclaim</username>
    <password>ENCSEMPKCCSFQTJBFMPABFJEBZJAKFCXGME</password>
    <from>WEAVE</from>
    <to>CES</to>
    <entity id="property" filter="proclaim.production.property"/>
    <entity id="street"/>
  </proclaim:config>

  <filter:db id="proclaim.production.property">
    <datasource>proclaim</datasource>
    <table>GEMS_LINK</table>
    <keycolumn>PID</keycolumn> <!-- column used in spatial database -->
    <idcolumn>PRUPI</idcolumn> <!-- column required for proclaim -->
  </filter:db>

</config>

...

When registering the Weave application with ProClaim the Automation Component for Weave is WeaveMapLink and WeaveHubProclaim and the Automation Class is WeaveMapAutomation MapAutomation.

There are two properties for the Weave application that should be set:

...