The two included .dll files Weave/Pathway integration provides a two-way link between Weave and Pathway. That is Pathway can call out to Weave to display information and Weave can call out to Pathway to display information.

For additional information about using the newer Weave Hub integration please see this page Weave Hub - Third-party Application Integration.

Client Workstation

The link between Weave and Pathway requires the installation of components on each client computer that will be requiring communication between Weave and Pathway.

The following two sections outline the installation and configuration of these components.

Installation

Two Pathway specific .dll files, pathway.dll and weavepathway.dll, must be copied and registered on each client PC, along with the weave link components.

This should be performed using the regsvr32.exe application provided with Windows, e.g.

        regsvr32 pathway.dll
 
      regsvr32 weavepathway.dll

The Pathway map component, PathMap.ocx, integration components must also be installed on the client, this components is supplied with Pathway. PathMap.ocx by Infor and should be located at ...\Pathway\Prod\msc\PathMap.ocx in Pathway.Integration.Setup.exe at your Pathway installation location.

Configuration

Then the The Pathway GIS integration must be configured to use Pathway.COMGIS1 as it's mapping component (weavepathway.dll implements Pathway.COMGIS1 ProgId)

Some versions of Pathway do not allow URL's require an executable file to be entered for the application executable, as the setup screens in Pathway verify that the application exists and does not allow the details to be saved because the application, which in the case of Weave is a URL, does not exist.

The workaround for this is to specify any application and then change the underlying database table.
The table is called LPAGISP, the columns to update is called EXEPATH, and the records to change is
where the GISCODEFIELD='COMGIS'.

...

one of the configuration parameters, a dummy executable, WeaveLaunch.exe, can be used if an executable is required.

Un-installation

The installation can be undone by using regsvr32 with the "/u" parametereparameter, e.g.

        regsvr32 /u pathway.dll
       
regsvr32 /u weavepathway.dll

And, also removing the PathMap.ocx registration.

Server

Configuration

...

Server

Entities in Weave must be linked to one of the four levels, prop PROP, parc PARC, titl TITL and/or strt STRT, in Pathway.

Firstly the pathway namespace must be added to the config.xml header

...

file header (or a separate pathway.xml file can be created and included in config.xml)

<?xml version="1.0" encoding="UTF-8"?>

<config xmlns=          "urn:com.cohga.server.config#1.0"
        xmlns:client=   "urn:com.cohga.html.client#1.0"
        xmlns:pathway=  "urn:com.cohga.pathway#1.0">
       
...
</config>

then the pathway configuration must be setup set up to link the pathway levels with the Weave entities

<?xml version="1.0" encoding="UTF-8"?>

<config xmlns="urn:com.cohga.server.config#1.0" xmlns:pathway="urn:com.cohga.pathway#1.0">

  <pathway:config>
    <link level="propPARC" entity="property"/>
    <link level="strtSTRT" entity="roads"/>

    <!-- Set the name of the Pathway database to launch if it's not already running -->
    <!-- this is the newer way of setting what Pathway has to be launched -->
    <database>Pathway</database>

    <!-- Optionally set the name of the Pathway application to launch if it's not already running -->
    <!-- this is the older way of setting what Pathway has to be launched, you should probably use database above -->
    <launch>C:\\Infor\\Pathway\\Demo\\msc\\Pathway.exe</launch>
  </pathway:config>

</config>

Client

Once the levels have been created the Pathway related actions can be added to the client configuration.

   <item action="com.cohga.client.actions.menuAction">
    <text></text>
    <iconCls>icon-pathway_pathway</iconCls>
    <item action="com.cohga.pathway.Display" text="Display"/>
    <item action="com.cohga.pathway.SendQuery" text="Send Query"/>
    <item action="com.cohga.pathway.DisplayOther" text="Display Other"/>
    <item action="com.cohga.pathway.SendQueryOther" text="Send Query Other"/>
    <item action="com.cohga.pathway.CreateLink" text="Create Link"/>
    <item action="com.cohga.pathway.Return" text="Return"/>
  </item>

Pathway Configuration

...

The configuration of Pathway itself must be done via the Pathway application.

Go to the GIS Product Parameter screen

...

From there edit the Generic COM GIS Interface

...

You need to set the GIS Layer and GIS Reference Field values for any items you wish to be able to send to Weave.

Also you need to set the window title and startup url in the Parameters. These two values are separated by a verticalbar (|), and the first value, the window title, is the text at the start of the Internet Explorer window title which the link uses to locate a running Weave browser window. The second part is the startup URL for Weave for use when there isn't already a Weave browser running, this is the URL that the link will open in a new Internet Explorer browser window to start Weave.

...

From there you need to configure the users to use Weave as the GIS link (it may be possible to do this globally rather than having to do it individually for each user)

...