Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Snippets and References

If you're running version 1.2.0 or later of the com.cohga.client.weave bundle you'll be able to take advantage of snippets, which are a way of reusing a piece of client configuration in multiple client configurations.

Previously the client configuration bundle only understood a single tag, which was config, and was used to define separate client configurations. Version 1.2.0 of com.cohga.client.weave introduces support for other tags allowing you to create little bits of configuration that can be reused within a config tag.

This allows you to centralize common configuration items from multiple client configurations that you want to be the same for all client configurations, for example setting the extents for map views, or ensuring the same label for every ToC view. Something like this can also be performed using the set processing instruction, but this method makes it much easier.

Snippets can only be used with client configuration items

To define a new snippet all you need to do is create the XML tags as you would if you were including them directly in the client configuration but rather than including them within the client configuration you create the tag at the top level within the config.xml file.

For example, lets assume that we want to create a snippet for the map extents in a map view, that way we can have multiple client configurations all with the same extents and only one location to set them, making it easier to change all of the clients at once.
So, if we currently have something like the following:

Example, all be it incomplete, showing some client configurations
<?xml version="1.0" encoding="UTF-8"?>

<config xmlns:client="urn:com.cohga.html.client#1.0">
	<client:config id="test1">
		<view id="com.cohga.html.client.map.mapView">
			<extents>
				<initial minx="327098" miny="5811358" maxx="351971" maxy="5827675"/>
				<full minx="327098" miny="5811358" maxx="351971" maxy="5827675"/>
			</extents>
		</view>
	</client:config>

	<client:config id="test2">
		<view id="com.cohga.html.client.map.mapView">
			<extents>
				<initial minx="327098" miny="5811358" maxx="351971" maxy="5827675"/>
				<full minx="327098" miny="5811358" maxx="351971" maxy="5827675"/>
			</extents>
		</view>
	</client:config>

	<client:config id="test3">
		<view id="com.cohga.html.client.map.mapView">
			<extents>
				<initial minx="327098" miny="5811358" maxx="351971" maxy="5827675"/>
				<full minx="327098" miny="5811358" maxx="351971" maxy="5827675"/>
			</extents>
		</view>
	</client:config>
</config>

To create a new snippet for the extents in the above sample we would extract the part of the configuration we want to make common, like this:

Common extents extracted into a snippet with the id 'defaults'
<client:extents id="defaults">
	<initial minx="327098" miny="5811358" maxx="351971" maxy="5827675"/>
	<full minx="327098" miny="5811358" maxx="351971" maxy="5827675"/>
</client:extents>

This would create a new snippet, called defaults of type extents. The id, defaults in the above example, isn't important and we can use anything that makes sense here (it's just used to refer to a specific snippet later when we want to use it). The type, extents in the above example, is important however and must be the same as the target tag that we're actually creating the snippet for, and it's the combination of the id and type that's used later on to include the snippet within a client configuration.

At the simplest to use the snippet within the client configuration simply requires a reference to the snippet to be added in place of the original tags, so to reference the new snippet we created you would replace the original extents tags with the following:

Referencing the new snippet
<extents ref="defaults"/>

Anywhere this is found within the client configuration it will be replaced with the contents of the snippet we defined earlier.

So to complete our example I'll show the complete client configurations that will replace the original using snippets:

<?xml version="1.0" encoding="UTF-8"?>

<config xmlns:client="urn:com.cohga.html.client#1.0">
	<client:extents id="defaults">
		<initial minx="327098" miny="5811358" maxx="351971" maxy="5827675"/>
		<full minx="327098" miny="5811358" maxx="351971" maxy="5827675"/>
	</client:extents>

	<client:config id="test1">
		<view id="com.cohga.html.client.map.mapView">
			<extents ref="defaults"/>
		</view>
	</client:config>

	<client:config id="test2">
		<view id="com.cohga.html.client.map.mapView">
			<extents ref="defaults"/>
		</view>
	</client:config>

	<client:config id="test3">
		<view id="com.cohga.html.client.map.mapView">
			<extents ref="defaults"/>
		</view>
	</client:config>
</config>

Refining snippets

Beyond just including the snippet in the client configuration you can also alter the snippet by including extra sub-tags in the reference.
For example if we wanted to setup one client configuration to have a different initial extent and another to add a limit extent we could do the following:

Altering included snippets
<?xml version="1.0" encoding="UTF-8"?>

<config xmlns:client="urn:com.cohga.html.client#1.0">
	<client:extents id="defaults">
		<initial minx="327098" miny="5811358" maxx="351971" maxy="5827675"/>
		<full minx="327098" miny="5811358" maxx="351971" maxy="5827675"/>
	</client:extents>

	<client:config id="test1">
		<view id="com.cohga.html.client.map.mapView">
			<extents ref="defaults"/>
		</view>
	</client:config>

	<client:config id="test2">
		<view id="com.cohga.html.client.map.mapView">
			<extents ref="defaults">
				<initial minx="327000" miny="5811000" maxx="330000" maxy="5813000"/>
			</extents>
		</view>
	</client:config>

	<client:config id="test3">
		<view id="com.cohga.html.client.map.mapView">
			<extents ref="defaults">
				<limit minx="327098" miny="5811358" maxx="351971" maxy="5827675"/>
			</extents>
		</view>
	</client:config>
</config>

this would be the equivalent of

Altered example shown not using snippets
<?xml version="1.0" encoding="UTF-8"?>

<config xmlns:client="urn:com.cohga.html.client#1.0">
	<client:config id="test1">
		<view id="com.cohga.html.client.map.mapView">
			<extents>
				<initial minx="327098" miny="5811358" maxx="351971" maxy="5827675"/>
				<full minx="327098" miny="5811358" maxx="351971" maxy="5827675"/>
			</extents>
		</view>
	</client:config>

	<client:config id="test2">
		<view id="com.cohga.html.client.map.mapView">
			<extents>
				<initial minx="327000" miny="5811000" maxx="330000" maxy="5813000"/>
				<full minx="327098" miny="5811358" maxx="351971" maxy="5827675"/>
			</extents>
		</view>
	</client:config>

	<client:config id="test3">
		<view id="com.cohga.html.client.map.mapView">
			<extents>
				<initial minx="327098" miny="5811358" maxx="351971" maxy="5827675"/>
				<full minx="327098" miny="5811358" maxx="351971" maxy="5827675"/>
				<limit minx="327098" miny="5811358" maxx="351971" maxy="5827675"/>
			</extents>
		</view>
	</client:config>
</config>

One thing you can't currently do is to remove a sub-tag from a snippet via the reference.

Nested snippets

Snippets can include references to other snippets and references can include references to other snippets. For example we could've created our extents snippet as follows

<client:initial id="default" minx="327098" miny="5811358" maxx="351971" maxy="5827675"/>

<client:full id="default" minx="327098" miny="5811358" maxx="351971" maxy="5827675"/>

<client:limit id="default" minx="320000" miny="5810000" maxx="360000" maxy="5840000"/>

<client:extents id="defaults">
	<initial ref="default"/>
	<full ref="default"/>
	<limit ref="default"/>
</client:extents>

And if we wanted to we could create a separate snippet for a "custom" extent

<client:initial id="custom" minx="328000" miny="5811000" maxx="331000" maxy="5817000"/>

Then in our "custom" client configuration we could use the following to accomplish the same as we did previously

<client:config id="custom">
	<view id="com.cohga.html.client.map.mapView">
		<extents ref="defaults">
			<initial ref="custom"/>
		</extents>
	</view>
</client:config>
  • No labels